CLLKZ - PHILLYCLAD 5066A RESIN

Product Identification

Product ID:PHILLYCLAD 5066A RESIN
MSDS Date:10/09/1998
FSC:8040
NIIN:01-446-0912
Status Code:A
MSDS Number: CLLKZ

Responsible Party
ITW PHILADELPHIA RESINS CORPORATION
130 COMMERCE DR.
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 800-424-9300

Info Phone: 215-855-8450

Preparer: ERNEST CARTER

Cage: 0SFY9

Contractor
ITW PHILADELPHIA RESINS CORPORATION
MONTGOMERYVILLE, PA 18936 US

Telephone: 215-855-8450

Cage: 0SFY9

Ingredients

TRADE SECRET DILUENT


BISPHENOL A DIGLYCIDYL ETHER RESIN

CAS: 25068-38-6

RTECS: CE6880000


AMORPHOUS SILICA

CAS: 7631-86-9

OSHA PEL NONE

Hazards

LD50 LC50 Mixture:NONE.
Health Hazards Acute and Chronic:EYE AND SKIN IRRITANT. POTENTIAL SKIN
SENSITIZER. AVOID CONTACT WITH EYES. AVOID PROLONGED OR REPEATED
SKIN CONTACT. DO NOT TAKE INTERNALLY. WASH THOROUGHLY AFTER
HANDLING.
Explanation of Carcinogenicity:NONE.
Effects of Overexposure:SKIN: MODERATE IRRITANT. THERMAL BURNS. SKIN
SENSITIZATION (RASHES, HIVES). EYES: MODERATE IRRITANT.CAN CAUSE
THERMAL BURNS. INHALATION:THE LOW VAPOR VAPOR PRESSURE OF THE RESIN
MAKES INHALATION UNLIK ELY IN NORMAL USE. INGESTION: ACUTE ORAL
TOXICITY IS LOW. MAY CAUSE GASTRIC DISTRESS.
Medical Cond Aggravated by Exposure:PREEXISTING EYE AND SKIN DISORDERS.
DEVELOPMENT OF PREEXISTING SKIN OR LUNG ALLERGY SYMPTOMS MAY
INCREASE.

First Aid

First Aid:EYES:FLUSH EYE WITH CLEAN WATER FOR AT LEAST 15 MINUTES WHILE
GENTLY HOLDING EYELIDS OPEN. GET IMMEDIATE MEDICAL ATTENTION.
SKIN:FLUSH SKIN WITH WATER. WASH THOROUGHLY WITH SOAP AND WARM
WATER. INHALA TION:REMOVE PATIENT TO FRESH AIR. ADMINISTER OXYGEN
IF BREATHING IS DIFFICULT. GET MEDICAL ATTENTION IF SYMPTOMS
PERSIST. INGESTION: DO NOT INDUCE VOMITING. GIVE TWO GLASSES OF
WATER TO DILUTE IF PATI ENT IS CONSCIOUS. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>204.4C, 400.F
Extinguishing Media:CARBON DIOXIDE DRY CHEMICAL FOAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND PROTECTIVE CLOTHING. COOL FIRE EXPOSED
CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:HEATING ABOVE 300 DEG F IN THE PRESENCE
OF AIR MAY CAUSE SLOW OXIDATIVE DECOMPOSITION AND ABOVE 500 DEG F
MAY CAUSE POLYMERIZATION.

Accidental Release

Spill Release Procedures:FOR LARGE SPILLS, PUMP TO STORAGE/SALVAGE
VESSELS. SOAK UP RESIDUE WITH AN ABSORBENT SUCH AS CLAY, SAND, OR
OTHER SUITABLE MATERIAL AND DISPOSE OF PROPERLY. FLUSH AREA WITH
WATER TO REMOVE TRACE RESID UE.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH SKIN, EYES, OR
CLOTHING. HANDLE MIXED RESIN AND HARDENER IN ACCORDANCE WITH THE
POTENTIAL HAZARD OF THE CURING AGENT USED. PROVIDE APPROPRITE
VENTILATION/RESPIRATORY PROTECTION. STO RE IN A COOL, DRY AREA AWAY
FROM HIGH TEMPERATURES AND FLAMES.

Exposure Controls

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES
AND CONDITIONS. USE NIOSH APPROVED ORGANIC VAPOR CARTIDGES FOR
UNCURED RESIN AND DUST/PARTICLE RESPIRATORS DURING GRINDING/SANDING
OPERATIONS OF CURED RES IN AS EXPOSURE LEVELS DICTATE.
Ventilation:LOCAL EXHAUST VENTILATION IS PREFERRED ALTHOUGH GOOD
GENERAL MECHANICAL VENTILATION IS USNALLY ADEQUATE.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Supplemental Safety and Health
HAVE EMERGENCY SHOWER AND EYE WASH AVAILABLE.

Chemical Properties

Net Prop Wt for Ammo:100
Boiling Pt:=260.C, 500.F
Vapor Pres:0.03 MM HG AT 171 F
Vapor Density:AIR=1:>1
Spec Gravity:>1.1
pH:NEUTRAL
Evaporation Rate & Reference:(BUTYL ACETATE=1): <<1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NONE.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG LEWIS OR MINERAL ACIDS, STRONG OXIDIZING AGENTS, STRONG MINERAL
AND ORGANIC BASES (ESPECIALLY PRIMARY AND SECONDARY ALIPHATIC
AMINES).
Stability Condition to Avoid:OPEN FLAME AND EXTREME HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON; ALDEHYDES, ACIDS AND
OTHER ORGANIC SUBSTANCES MAY BE FORMED DURING COMBUSTION OR
ELEVATED TEMPERATURE (500 DEG F) DEGRADATION.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN RESIN IS
MIXED WITH CURING AGENTS; RUN-A -AWAY CURE REACTIONS MAY CHAR AND
DECOMPOSE THE RESIN.

Disposal

Waste Disposal Methods:IF THIS RESIN BECOMES A WASTE, IT WOULD NOT BE A
HAZARDOUS WASTE BY RCRA CRITERIA (40CFR 261). DISPOSE OF ACCORDING
TO APPLICABLE FEDERAL, STATE, AND LOCAL REGULATIONS.

Toxicology

Toxicological Information:ACUTE ORAL EFFECTS: LD50 (RAT): 11,400 MG/KG
ORAL LD50 (MOUSE)=15.6 G/KG ACUTE DERMAL EFFECTS: LD50 (RABBIT):
>20 ML/KG.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecology

Ecological:NOT PROVIDED.

Transport

Transport Information:COMPOUNDS, CLEANING LIQUID

Regulatory

SARA Title III Information:IMMEDIATE HEALTH HAZARD DELAYED HEALTH
HAZARD.
Federal Regulatory Information:ALL INGREDIENTS OF THIS PRODUCT ARE
LISTED, OR ARE EXEMPT FROM LISTING, ON THE TSCA INVENTORY. EXPORT
NOTIFICATION IS REQUIRED UNDER TSCA SECTION 12B SEE BELOW.
State Regulatory Information: